This is a routine check for your mTAP Hub. It confirms that the battery care setting on the device is switched on. It takes about 5 minutes and you only need the device itself.

You will need: your mTAP Hub Key (the numeric code from mTAP support).

Please don't change anything except the steps below. If something on your screen looks different from these pictures, stop and contact mTAP support.

Part 1 – Open the device settings


Step 1: Open the Hub Key screen

On the mTAP home screen, quickly tap the logo 4 times in a row.

Image Placeholder


Step 2: Enter your Hub Key

Type your Hub Key on the keypad and tap Submit.

Image Placeholder


Step 3: Go to Settings

At the bottom of the screen, tap Settings.

Image Placeholder

Step 4: Open System Settings,

Under Device Control, scroll down and tap System Settings.
Image Placeholder

Step 5: Choose Android Settings
In the menu that appears, tap Android Settings.

Image Placeholder


Part 2 – Check the battery setting.


Step 6: Open Apps

Tap Apps.
Image Placeholder

Step 7: See all apps

Tap See all apps. The number of apps on your device may be different from the picture.
Battery-Health-Check.md
Image Placeholder

Step 8: Select Magisk

Find Magisk in the list and tap it.
Battery-Health-Check.md

Image Placeholder

Step 9: Open Magisk
Tap OPEN.
Do not tap Uninstall or Force Stop.
Battery-Health-Check.md

Image Placeholder


Step 10: Go to Modules

At the bottom left, tap Modules.

Do not tap any other buttons on this screen, such as Reinstall or the icons at the top.
Battery-Health-Check.md

Image Placeholder

Step 11: Check the Advanced Charging Controller (ACC) switch

Look at the switch next to Advanced Charging Controller (ACC).

 If the switch is…
 What it looks like
 What to do
OFF
Grey switch, faded text
Tap the switch to turn it on
ON
Blue switch, dark text
Leave it as it is, but please report it to us with 2 photos (see Please report to us)
Not in the list
No Advanced Charging Controller (ACC) on the Modules screen
Don't change anything. Take a photo of this screen, stop here and report it to us

Do not tap Remove.


OFF (needs to be turned on)

Image Placeholder

ON (correct)

Image Placeholder

Part 3 – Restart and confirm


Step 12: Restart the device

Restart the device, even if the switch was already on:

1. Press and hold the power button on the side of the device.
2. Tap Restart.
3. Wait for the device to start up fully.


Step 13: Check the switch again

After the restart, repeat Steps 1 to 11 and confirm that the ACC switch is ON (blue).

  • ON: you're done. Go to Step 14.
  • Still OFF: turn it on, restart again, and check once more. If it is still off after that, please contact mTAP support.

Step 14: Return to mTAP

Open the mTAP app again (press the Home button, or select mTAP from your apps). The mTAP home screen should appear and the device is ready for normal use.


Quick checklist

  • Opened Settings with the Hub Key
  • Android Settings → Apps → See all apps → Magisk → Open
  • Modules → ACC switch turned ON (blue)
  • Restarted the device
  • Checked again after the restart: ACC is still ON
  • Opened the mTAP app again

Please report to us if:


1. The ACC switch was already ON when you first checked it in Step 11.
Please send us 2 photos:
1- A photo of the Modules screen showing the ACC switch ON (blue), and
2- A photo of the battery percentage while the device is plugged in. You can see it at the top of the mTAP
home screen (as in the Step 1 picture).

2. Advanced Charging Controller (ACC) was not in the list on the Modules screen.
Please send us 1 photo of the Modules screen showing that ACC is missing.
1- Send the photos to mTAP support and tell us which case happened.

If you have any other questions, please contact mTAP support at support@mohid.net