How to setup KIOSK from Admin Dashboard:

  • Go to Admin Dashboard.
  • Click on Edit KIOSK key against KIOSK specific KIOSK on which you want to do settings.
  • Click on Description (enter location where you are installing your KIOSK. example, main hall, sister side..)
  • Click on Scrolling text to type any message that you want to display on KIOSK.
  • Click on logo to browse your logo file location to upload the logo for your KIOSK.
  • Click on main theme color to set theme color for your KIOSK.
  • Click on Button 1 & Button 2 drop down to select any option that you want to display on your KIOSK.
  • Click on radio button to enable Email mandatory option for donor to get receipt or if you want email option to be optional please disable radio button.
  • Mark KIOSK status Active.
  • Click on Save,


KIOSK Android version 10 or above KIOSK are compatible with Stripe readers.



How To Setup KIOSK Terminal Steps:


  • Please turn On your KIOSK first please and wait for MOHID application to start automatically.
  • Type admin in KIOSK key tab.
  • Click on Settings.
  • Click on Network and internet (connect your network as per your network availability LAN/Wi-Fi).
  • Click on back arrow key using top left corner.
  • Click on systems.
  • Click on date and time settings.
  • Click on Disable automatic time zone toggle.
  • Click on time zone to adjust region and time zone manually as per you masjid location.
  • Click on back arrow key.
  • Now type KIOSK key as mentioned on your MOHID admin dashboard. (Please make sure to enter correct key as it's a unique key that can be use only in one KIOSK at a time if you use same key in more than one KIOSK than you will face transaction failure or KIOSK application crash issues)

Software Upgrade


Please follow the steps mentioned below to upgrade your KIOSK to version 20 or higher:
  • On KIOSK terminal, double tap on the top left corner
  • Login with your admin password (default password is admin)
  • Click on UPGRADE option displayed in the main menu

Important :

Before installing the Stripe Wisepad Reader, please make sure that you have upgraded your KIOSK to the provided version in email and you have an approved Stripe Payment processing account


Only KIOSK Android version 10 or above are compatible with stripe reader


Step 1:

  • Remove the existing plastic Base Plate and Magnetic Strip Card Reader from KIOSK
  • Remove the 5 screws mentioned in the picture below to detach the card reader and the base plate


Step 2:

  • Check the contents of the Upgrade Kit for all the parts shown in the figure.



Step 3:

  • Install the Bracket (B) with the Metal Base Plate (A) using 2 screws (C)
  • Important: Do not tighten the screws at this time , keep them loose to adjust bracket later
  • There are 2 holes in base plate (A), you can use any of them to attach the Bracket (B). 
  • Make sure to use same holes to keep the bracket straight when installed



Step 4:

  • Place the KIOSK on a flat surface with the screen facing down (put a cloth or soft material to safe the screen)
  • Put the Base Plate (A) on the back side of the KIOSK and align the screw holes with the holes located in the back.
  • Make sure that the lower edge of the bracket aligns to the lower edge of the KIOSK (See picture below for details)
  • Use the Screws (D) to attach the Base plate (A) with the back side of the KIOSK

Step 5:

  • Use the Screw (E) to further secure the Base Plate (A) with the KIOSK
  • Note: Screw (E) might need to be tighten on an angle due to the curved edge on the back of KIOSK
  • Make sure to put the included nut with Screw (E) to have a tight connection.
  •           

Step 6:

  • Flip the KIOSK over so that the Screen is now facing up
  • Slide the Bracket (B) towards the KIOSK edge so that there is no gap between the Bracket (B) and the KIOSK edge
  • Now tighten the 2 Screws (C) which were kept loose in Step 3.


Step 7:

  • Flip the KIOSK again so the screen will face down
  • Slide the Stripe WisePad3S into the Bracket (B) 
  • Atatch the Stripe Wisepad Reader with the Bracket (B) using the small screws (F)
  • Connect the included USB-C cable with the Pin Pad
  • Connect the other end of the USB-C cable with KIOSK



Step 8:

  • Double tap on the top left corner of the KIOSK's screen
  • Login with Admin password
  • Go to KIOSK Settings
  • Select Reader option
  • Select Stripe Wisepad Reader
  • Click Ok
  • Click to Submit from top left corner.

Step 9:

  • Double tap on the top left corner of the KIOSK's screen
  • Login with Admin password
  • Go to KIOSK Settings
  • Click on upgrade stripe (wait for the stripe reader to upgrade and configure with MOHID automatically)
  • Click on back arrow

Your KIOSK is now ready to be used for Contactless, Apple pay/Google Pay and EMV Chip based transactions.




Only KIOSK Android version 10 or above are compatible with stripe reader


To connect your Stripe Wisepad Reader with your KIOSK terminal, please make sure that on your KIOSK  turn on your google accuracy location ON . (This applicable only if you have older MOHID application below 20)